Key Features: - 2.1-Channel Configuration - Dual 2" Satellite Drivers - 3" Subwoofer + 4" Passive Radiator - Driver Lighting with 8 Color Choices - Play Music Wirelessly with Bluetooth - Controls on Subwoofer - Includes RCA / 3.5mm Y Adapter

Key Features: - High-fidelity sound - 5.25" woofers with woven fiberglass cone - 3/4" PEI diaphragm tweeters with fluid cooling - Built-in InvisiBall mounting hardware - Weather-resistant enclosure and transducers - 100° x 100° coverage - 100W power handling (200W program) - Frequency response of 85 Hz to 17 kHz

Key Features: - High-output 2414H-C compression driver with 1" exit - Woven-fiberglass cone for a high degree of weather capability - Pure butyl rubber surround for clean sound quality - Optimized cone geometry provides for smooth frequency response and good off-axis performance - Linear suspension spider provides low distortion - FEA-optimized motor construction produces minimum harmonic distortion - Aluminum coupler ring outside the pole post reduces distortion and increases sensitivity - 110 x 110° symmetrical coverage - WeatherMax multi-layer foam and tight-weave screening grille - InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward) - Sealed input-panel cover and screw-down input terminals included for secure connection

Key Features: - Studio quality transducers for accuracy, and rich bass response: 80 Hz - 20 Khz - 35 watt per-channel power amplifier and high sensitivity drivers produce exceptional output: - 115 DB max SPL per pair - Balanced XLR, ¼”, and unbalanced RCA inputs allow connection to a range of signal sources - Stereo headphone jack allows monitoring using headphones - Ergonomic, side-mounted volume control - simultaneously controls left and right speakers - High frequency adjust control - allows the user to contour HF response to application requirements - Magnetically-shielded transducers for use near CRT monitors and magnetically sensitive equipment - Internal peak limiter and overload protection circuit - protects the system from damage caused by continuous over-driving - Wall-mount capable using optional MTC-2P mounting kit - Included snap-on pedestals optimize listening angle for desktop applications

Key Features: -165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround - 19 mm (0.75 in) soft-dome liquid-cooled tweeter - Blind-mount backcan for quick and easy install - Dual conduit/cable clamps - Combined 70V/100V and low impedance direct operation - 50 Watts at 8Ω nominal setting - 30W multi-tap at 70V/100V - 62 Hz – 20 kHz bandwidth with wide 110° coverage - High 91 dB sensitivity for high maximum SPL

Key Features: - Extremely wide 150° coverage. - Smooth frequency response. - Advanced crossover network provides very even coverage throughout listening area. - 115 mm (4.5 in) woofer, injection molded graphite cone with butyl rubber surround. - 12 mm (.5 in) polycarbonate tweeter for extended response. - Includes 25 W multi-tap transformer for 70 V/100 V systems. - Shallow 105 mm (4.1 inch) depth from back of baffle. - Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.

Key Features: - 200 mm (8.0 in) high output driver with polypropylene cone and butyl rubber surround - 25 mm (1.0 in) soft-dome liquid-cooled tweeter - Blind-mount backcan for quick and easy installation - Dual conduit/cable clamps - Combined 70V/100V and low impedance direct operation - 90 Watts at 8Ω nominal setting - 60W multi-tap at 70V/100V - 58 Hz – 20 kHz bandwidth with 90° coverage - High 92 dB sensitivity for high maximum SPL

Key Features: - 100 mm (4.0 in) high output driver with polypropylene cone and butyl rubber surround - 19 mm (0.75 in) soft-dome liquid-cooled tweeter - Blind-mount backcan for quick and easy install - Dual conduit/cable clamps - Combined 70V/100V and low impedance direct operation - 30 Watts at 8Ω nominal setting - 25W multi-tap at 70V/100V - 74 Hz – 20 kHz bandwidth with wide 120° coverage

Key Features: - 76 mm (3 in) full-range driver - Blind-mount backcan for quick and easy install - Combined 70V/100V and low impedance direct operation - 20 Watts at 8Ω nominal setting - 15W multi-tap at 70V/100V - 68 Hz – 17 kHz bandwidth with wide 130° coverage

Key Features: - Coaxially mounted 100 mm (4 in) woofer with butyl rubber surround and 19 mm (.75 in) titanium coated - High power, wide frequency response and low distortion for high sound level capability. - Wide coverage allows fewer speakers, reducing the cost of - Packaged with grille, backcan and tile rails for fast installation and easy dealer stocking.